best scroll saw blades

Best Scroll Saw Blades – The UK’s Top 3 in 2022 (Reviews & Buying Guide)

Property Workshop is proudly reader-supported. When you buy through links on our site, we may earn a small Amazon affiliate commission but this does not affect the price you pay. Learn more here.


A scroll saw is only as good as its blades, so choosing the best blades makes a significant difference in the quality of your work. Trust me, I speak from bitter experience!

To help you pick the best scroll saw blades for your saw, we’ve spent hours testing the best blades on the UK market. We’ve also put together a handy buying guide to help you can buy with confidence.


Best Scroll Saw Blades – The UK’s Top 3 in 2022

These are our picks as the best scroll saw blades in the UK, starting with our top pick:

Our Top Pick
1. Olson SA4980
  • Precision ground tooth PGT blades
  • Double tooth for top performance in hardwoods
  • A unique tooth geometry and widely spaced gullets minimize burning.
  • Made of the finest carbon steel
  • Wide range of sizes

Olson provides double reverse tooth designs in their pack of 18 blades. Manufactured out of carbon steel, they range from 0.45mm to 0.49mm in width. 

Olson describes them as having unique tooth geometry, and the widely-spaced gullets should reduce heat and friction while cutting takes place. Furthermore, the 140mm length ensures a good cutting depth.

Pro Tip: The handy chart below from Olson helps you pick the right PGT blades for your scroll saw and project. For the full selection chart, click here.

scroll saw blade selection chart
ProsCons
Supplied in generous quantitiesExpensive compared to most other options
Designed to reduce heat and friction

Best Budget Scroll Saw Blades
2. Silverline 763619
  • Hardened carbon steel
  • For cutting wood, plastic & non-ferrous metals
  • 3mm wide x 0.4mm thick
  • 100mm effective cutting length with 21TPI
  • Alternate off-set teeth

Silverline’s ten-pack of blades are all standard tooth designs and are available with one of four different TPI counts. 

Each blade is 0.4mm thick and 130mm long, with a sufficient cutting length of 100mm. There’s little price difference between the 10, 14, 21 and 24TPI blade options. 

Carbon steel construction slices through non-ferrous metals, though some reviews note a degree of flex.

ProsCons
InexpensivePinned blades
Four different TPIs per pack

Also Great
3. Dremel MS52
  • Cuts Laminates, Plywood, Plastic, Chipboard, Softwood, Fiberboard and Hardwood
  • 7 teeth per centimetre
  • Pack of 5 blades
  • Width: 4mm
  • Total length: 100mm
  • Cutting depth: 12mm

The Dremel MS20 scroll saw weighs just 4kg and is also capable of working as a fretsaw. 

This handheld pedal-powered scroll saw only cuts to a modest depth, so the MS52 blades have a maximum cut depth of 12mm. 

You get a pack of five pinned standard tooth blades, with seven teeth per centimetre, capable of slicing through materials as diverse as copper and acrylic.

ProsCons
Great for the Dremel MS20Limited cutting depth
High TPI

Best Scroll Saw Blades – 2022 Comparison Table

ModelQuantityLength (mm)PinnedRating
Olson SA4980 18140No8
Silverline 76361910130Yes7
Dremel MS525100Yes6

Scroll Saw Blades Buying Guide

While held firmly in place above and below the cutting table, these vertical metal strips vibrate at up to 4,800rpm. It’s, therefore, essential to ensure the blades are secured in place but not over-tightened. 

You can use scroll saws to cut through hardwood, sheet metal and plastic. Each blade is covered in angled teeth, which should face downwards for clean cuts. 

The blades may need to slice through material 50mm deep for long periods, generating considerable heat, while vacuum systems suck up the dust around them. As such, scroll saw blades live punishing lives, so various designs are built for different materials.


Pins and Needles

One of the main distinctions between scroll saw blades is whether they’re pinned in place. Most scroll saws use pinless or plain-end, but some still use pinned or pin-end blades. 

We review both types above, though experts recommend plain-end blades wherever possible as they’re better suited to cutting holes in the middle of the material and compatible with a higher proportion of scroll saws. 

Plain-end blades are held in place by screws or clamps, and adjusting the tension is a matter of trial and error. Too loose, and the blade will shudder. Too tight, and it may snap.


Baring your teeth

There are several teeth layouts. These include:

  1. Standard tooth. Each tooth is identically sized, evenly spaced and facing downwards.
  2. Double tooth. Teeth are arranged in pairs with gaps between each pair for cleaner cuts.
  3. Reverse. Some teeth face one way, but others are reversed to reduce the risk of splintering.
  4. Spiral. Blades wrap around a central spindle, cutting equally in every direction.

Different jobs benefit from using specific types of blades. For instance, spiral blades are great for straight cuts through hard materials, and reverse blades help to prevent splintering while cutting composite materials like plywood. 

The video below summarises how to choose the right scroll saw blades:

YouTube player

Pro Tip: The number of teeth per inch on the blade is known as teeth per inch (TPI).


Size matters

Blades vary considerably in length, width and thickness. Larger blades are better suited to thicker or more challenging materials and are more durable. However, smaller blades are more precise with delicate cuts. 

Most scroll saws accept varying blade lengths, but a blade’s thickness affects the width and accuracy of your cut. Scrollsawer.com has published a guide to what scroll saw blade to use for particular materials.


Best Scroll Saw Blades – Final Thoughts

Your choice of scroll saw blades ultimately depends on your requirements. For buyers on a budget and with a scroll saw supporting pinned blades, it’s hard to argue against Silverline’s value for money. And if you’re a Dremel MS20 owner, only the company’s MS52 blades will suffice.

However, our award for the best scroll saw blades goes to the Olson SA4980 due to its wide range of blades and construction quality. They cost a lot more than the others, but we firmly believe they’re worth it.

Pro Tip: Always check factors like the teeth configuration, pinned or pinless design and the blade length/thickness when buying the best scroll saw blades. 

If you want to learn more, check out our review of the best scroll saws in the UK.