Last Updated on
Would you know how to make one large room into two by building a partition wall? When we moved into our current four-bedroomed house, not only was it a dump, but the previous owner had taken down a partition wall between two bedrooms to make it one long room, with unnecessary large areas of storage.
As we had three kids, it was imperative that we had a four-bedroomed home. A stud wall was quickly and easily erected, and a bedroom door situated. My son breathed a sigh of relief because, as the middle child, he feared moving into an old house and having to share a room with his little sister. Of course, he was only ten and didn’t yet know how to build a stud wall.
What are some ways a partition wall can provide your home with extra comfort and usability? Do you desperately need an extra bedroom, a small office, a utility room, an art or music studio? What about a playroom for - not the kids - but you?
Extra Pro Tip: Attach a bedsheet at the position in which you wish to build the partition wall. Check that there is enough space for storage, and that your bed or wardrobe will fit. This also gives you the option of drawing the imprint (on the floor) of any large piece of furniture you plan to place in the room. Check before you build!
According to the DIY giant, B&Q,if you have an electronic detector, check for the following before doing any work. If you don’t have one, you can rent one from a tool rental in your area (or even ask friends on social media). It’s important that you find potential trouble before work commences.
You want to check for: pipes, water cables, and joists.
Pro Tip: Your stud wall will probably use about 12 cm from your existing room, so cater for this.
For your frame, get these materials and tools ready:
Once you’ve decided where the partition wall will go, use a spirit level or a long ruler to draw lines (from the top to the bottom) on the walls in your chosen position.
Secondly, screw the sole plate - a piece of sawn timber (100mm by 50mm is ideal) to the floor between the two lines you’ve just drawn. Before completely securing, make sure this line is straight by using your spirit level.
The screws with which you fix the timber to the floor should be about 500mm apart.
If you’re putting a door in, it helps to lay the door and the completed door frame on the floor, then mark and cut the sole plate accordingly.
The head plate. Attach another piece of sawn timber - of the same size - on the ceiling joists. Remember to measure correctly. Double check straightness and position by using a spirit level, as you want to measure twice and cut once.
Don’t worry about the position of your ceiling joists. If they run opposite to your partition wall, attach the head plate to each of them with screws. If they run in line with your partition wall, simply fix noggins between them before attaching your head plate. (See below for the description of noggins).
After these two items are secure. Measure and cut more sawn timber for the studs.
Pro Tip: You want to cut the studs about 1mm longer than what you need, then hammer them into place. This ensures that your wall is secure and strong.
Fix the studs between the sole and head plates. You can use nails for this. The first and last studs are fixed snugly against the walls on both sides.
All other studs can be placed between 400mm and 500mm apart. Nails are easier to use for this. All nails can be placed diagonally.
Pro Tip: Fix all studs in place before nailing any of them. This way, if you have to move them around for more equal spacing, you can do this easily.
Once the studs are in place, cut your noggins to size. They go horizontally between the studs. Remember again to cut about 1mm longer than you need and hammer into place. This produces a better, more sturdy wall.
Nail the noggins across the studs. Again, fix them all in before you begin nailing. To make it easy on yourself, the DIY doctor says you should fix noggins in staggered positions, so that they can be nailed in more easily.
For this section get these tools and materials ready:
The first thing to do before adding your plasterboard is to mark on the floor the positions of the studs. This makes such a difference when it comes to nailing the plasterboards into place.
There are several types of plasterboard available. Choose what suits you best when it comes to factors like sound-proofing, insulation, energy efficiency, easy-to-cut varieties. There are also smaller, handier-sized sheets available.
Pro Tip: Your craft knife will get pretty dull after cutting through plasterboard. You will need several new ones, or one with replaceable blades.
Cut on the ivory side of the plasterboard, using your knife and a sharp metal-edged ruler. Once the line has been cut through the full length of the board, turn it over and fold along the cut line. It should snap quite easily. You can then use your knife to separate (cut) the paper backing.
Once you have measured and cut the plasterboards, and have nailed them into one side, a good practice is to insulate your wall before finally fixing plasterboard to the other side of the stud wall.
For this section get these tools and materials ready:
To finish off your work nicely, just nail in corner beads (for straight corners when you plaster the wall). Then add scrim tape to the areas where the plaster boards have been joined. This is important because it prevents cracks when the wall is plastered.
If you need a demonstration of how this is all done, here’s a very straight-forward DIY video, that shows you step-by-step, how to build your own partition wall.
For our family, having good-sized bedrooms instead of a massive one enabled our kids to have their own safe space, with their personal items around them. This was very important for their emotional well-being when - for the first few months after moving - we lived in a dusty, old, wretched house.
What could a partition wall mean for you? Would it enable you to have your own separate office away from the family? A new bedroom? An art studio?
We hope this article has answered any questions you had about building partition walls. If you’ve benefited from it, please share it on your social networking sites.
Anne Lyken-Garner is a published author and experienced blogger and editor. She also manages DIY Projects and works in TV