Buying an old property that has fallen into disrepair can be a great way to get a bargain in today’s housing market, but neglected properties often suffer from rot which will need treating before a home can be lived in.
This guide will teach you how to diagnose dry and wet rot, looking at the signs your house is infested and what treatment methods are available. There is a step-by-step tutorial on how to treat the rot, along with tips on preventing rot returning.
Dry rot has white or grey root-like strands. These dry out and become brittle.
Sometimes rot forms sheets called Mycelium. Dry rot is either off-white, pale yellow or lilac.
Dry rot produces flat spores that are red in the centre with an off white surround. Dry rot spreads using these red fungal spores.
The final sign of rot is cracking across the wood. Large misshapen cracks indicate dry rot.
Wet rot has three varieties. Coniophora Puteana has dark grey/brown/black stands and stays flexible when dry. Fibroporia Vaillantii has thick white strands, while Asterostroma has thin white strands.
Wet rot Mycelium sheets are always a very bright white.
Wet rot produces tiny mushrooms that are beige and is caused by wood-boring weevils, identifiable by the fine sawdust they leave behind.
Wet rot has an earthy smell and will cause paint to flake off. The wood will be soft to touch.
Small cracked squares across the wood are the final sign of wet rot.
Boron treatment is easy to apply, safe for animals, and water-based which makes it odourless. It comes in a solution for large patches and a gel for heavily infested areas or places where extra water would be a hindrance. Simply coat area with solution using large paint brush.
Boron Epoxy paste and rods should be used in places where the timber will be permanently wet. Paste is squeezed into the gap left by rot and rods are inserted the length of the timber.
The treatment kills the spores and hardens the wood, preventing the rot from returning.
With a chisel, scrape out rotten sections of timber. If the wood is rotten through, cut out section with a hand saw. Drill evenly spaced holes in remaining timber to help wood absorb the treatment.
Mix up solution according to manufacturer’s instructions and paint on with a large clean brush. Epoxy pastes will need to be spread on with a PALETTE KNIFE, or inserted using a sealant gun.
Leave to dry, covering with plastic wrap if area will be exposed to moisture during the drying time. This is usually two hours, but check the instructions on the packet.
If necessary replace rotted wood by inserting cut timber patches or using wood filler.
Apply dry rot paint around affected areas to prevent spreading.
As long as dry and wet rot is treated, it shouldn’t pose a problem. It’s a nasty thing to deal with, but once the rot is removed and the wood treated as per the above instructions, it shouldn’t return.
Watch the following video for a close-up look at wet rot on a window pane:
If you have found this guide helpful, please share on social media or leave us a comment below.
Last Updated on
Blogger who spent childhood suffering through many house renovations, but at least now is old enough to design rooms to her taste